s301la edp cable lxpa 14005-01050300 dd0exalc110 Asus S301L S301LA
Asus VIVOBOOK Q301L Q301LA
Asus VivoBook RQ301LA
Category : LCD Cable
In most cases you should see listed above cited reference S301LA EDP CABLE 14005-01050300 DD0EXALC110 if this is not the case, check uploaded photos.
Symptoms of a faulty LCD cable
Most of the time a defective cable S301LA EDP CABLE 14005-01050300 DD0EXALC110 causes sizzle on the screen when you move your computer screen ASUS S301L S301LA.
You can also see if the cable is really broken a blank screen, look this symptom can also mean that your monitor or the graphics card in your pc ASUS S301L S301LA a problem.
In very rare cases, there may be a problem as RGB color on your screen while still ASUS in this case, it may be due to your monitor or graphics card ASUS
How to change your cable S301LA EDP CABLE 14005-01050300 DD0EXALC110 effectively?
First put the gloves antistatic to avoid any risk of short circuit when handling your notebook ASUS S301L S301LA. You will remove the screen from the top of the computer and remove the front of the hull before ASUS, remove the hinges and fold the screen, most of the time you need to remove the tape that serves as protection to unclip the horizontal (so straight) cable connector S301LA EDP CABLE 14005-01050300 DD0EXALC110 Do not try to pull up because you will deform the metal part and there will be the game that will cause poor interconnection.
Then following computers ASUS it will remove the front bezel or outright all or part there is the touchpad to access the connector on the motherboard ASUS take care to recover from a vertical connector of your S301LA EDP CABLE 14005-01050300 DD0EXALC110 otherwise you will bend the pins on the motherboard and it should replace the motherboard.
Between the two there is also just unclip the cable connector located on your ASUS S301L S301LA inverter. (I note that the new models ASUS, there is more because they have a inverter LED technology. Careful though, do not pull the plug and not the son, because there is a risk that you cassiez one.
Once reassembled, it is important to put a new tape on connectivity at the top of the screen.