TW-0H1309-70090-51T-2273 REV A01 PANASONIC E233037 UDQFWPH02CQU DC5V 0.11A 5117D SUNON GB0506PGB1-8A DC5V 1.4W
Dell Latitude D505 PP10L
Category : Fan
Symptoms of a faulty fan DELL LATITUDE D505 PP10L
Defective fan DELL LATITUDE D505 PP10L generally results in a rubbing noise, if the noise happens after remounting or shock, it is possible that this is because the copper heatsink which is deformed causing friction.
Another problem with the outright failure of your computer due to overheating which had a rotation too low on your computer DELL. To see if this is really it had to use a software to test cpu will heat your computer to the max, so that it can be quickly cut it. Sometimes you will not have to change it, but just to unclog the radiator to accumulated dust.
Other cases, your fan is not running TW-0H1309 UDQFWPH02CQU DC5V 0.11A more careful though sometimes it had the motherboard. How do we know? Only by testing with a new fan. (Less annoying than testing with a new motherboard.)
Choosing a fan
Attention, a reference TW-0H1309 UDQFWPH02CQU DC5V 0.11A a fan does not always indicate the correct model as a reference TW-0H1309 UDQFWPH02CQU DC5V 0.11A listed on the castings can be different between the computer models that make them incompatible.
Attention also when you choose your fan DELL LATITUDE D505 PP10L by computer model, in fact the same laptop model following its variants can have different cooling systems that also make them incompatible with each other ....
It is best to rely on the photo for this kind of component.
Change fan DELL LATITUDE D505 PP10L
Most of the time, you need to disassemble the entire bottom of your laptop DELL. Be careful not to break the pins on the fan during installation or twist the copper heatsink. You just have to unscrew and unclip the connector. (Do it with a screwdriver at the connector but do not pull vertically on the wire, you may cut to one)
Maintain its fan DELL LATITUDE D505 PP10L.
With little to do except make a call compressed air from time to time taking care to block the propellers not to break the mechanism.